FUTABA 9 CHP SUPER Instruction Manual page 12

TRANSMITTER CONTROLS - HELI
CAMPac or Dust Cap
VR(A)
Hovering - Pitch Knob
SW(B)
Rudder Dual Rate Switch
SW(A)
Elevator Dual Rate
Switch
SW(F)
Idle-up 3 Switch
SW(E)
Idle-up 1&2
Switch
VR(D)
Throttle/Collective
Pitch & Rudder Stick
Power
LED*
Throttle/Collective
Trim Lever
Rudder
Trim Lever
This figure shows the default switch assignments for a 9CH super Mode 2 system as supplied by the factory.
You can change many of the switch positions or functions by selecting a new position within
the setting menu for the function you wish to move. (Example: move aileron dual rates to switch C
** RF LED is blue when the transmission link is solid and the radio is transmitting properly.
VR(B)
CH8 Knob
Edit Keys
Hook
(for optional neckstrap)
Power Switch
(Up position: ON)
to create triple rates. See p. 35 for details.)
* Power LED blinks to indicate if any mix switches are activated.
Be careful not to bend your antenna when you
Antenna
collapse or extend it.
Antenna must be fully extended when flying.
Carrying Handle
VR(C)
Hovering - Throttle Knob
Edit keys
LCD Panel
12
SW(C)
CH 7/Governor Switch
SW(D)
Aileron Dual Rate Switch
SW(H)
Trainer Switch
SW(G)
Throttle - Hold Switch
VR(E)
Elevator
/Aileron
Stick
RF
LED**
Elevator Trim Lever
Aileron Trim Lever
Dial