FUTABA 9 CHP SUPER Instruction Manual page 96

GOAL of EXAMPLE:
Set up a heading-hold/AVCS gyro with
heading-hold/AVCS setting in idle-ups
1 and 2 and normal mode setting in
idle-up3 and normal.
Where next?
Gain Example for AVCS/Heading-hold Gyros (GY)
100% NOR
"Normal Mode"
-100%
STEPS:
Open and activate the GYRO function.
Optional: change gyro type to
Heading-hold (GY).
Optional: change switch assignment.
Ex: select Cond.
Adjust gyro rates as needed. (Ex:
NORM, IDL3 to –50%. IDL1 and 2 to
+50% as starting points.)
Close the function.
GOVERNOR: see p. 97.
D/R,EXP: see p. 35.
DELAY: see p. 92.
GY
0%
0%
STD
INPUTS:
9
100% AVC
"Heading Hold Mode"
+100%
for 1 second.
(If basic,
to GYRO.
to SW.
to Cond.
to NORM 50%.
to AVC 50%. Repeat as needed.
again.)