FUTABA 10CAP Instruction Manual page 105

HIGH/LOW PITCH ( HI/LO-PIT ):
idle-up 2, idle-up 3, throttle hold).
GOAL of EXAMPLE:
Set up a high pitch curve in the idle-up
1 condition.
Where next?
Adjustability:
• The conditions are activated in the CONDITION SELECT function (p.100).
• Both adjustments may be set to MANUAL , temporarily turning off the knob.
• Adjustments may be memorized and then return the knobs to center point to
use that amount of adjustment. Allows easy use of the trimming knobs for
multiple models.
STEPS:
Open the HI/LO-PIT function.
Select the idle-up 1 condition.
Set the rate. (Ex: 80% )
Optional: change which knob adjusts
high pitch curve.
Store the current dial settings prior to
selecting another model.
Close.
PIT-CURVE : see p. 100.
HOV-PIT : see p. 104.
105
INPUTS:
for 1 second.
(If BASIC ,
C to HI/LO-PIT .
C to NORM . to IDL1 .
C to HI-PIT .
to 80% .
to VR .
C
to desired knob and direction.
C to HI-PIT .
for one second to store.
or VR(E) to center.
again.)