FUTABA 10CAP Instruction Manual page 9

Your 10CAP, 10CHP or 10CP (packaged with an 8 or 10-channel PCM receiver or a 14-channel FASST-2.4G
receiver), 10CAF or 10CHF (packaged with an 8-channel FM receiver) system includes the following components:
• T10C Transmitter, including RF module (TP-FM or TM-10)
• R138DF, R148DF, R138DP, R1410DP, R319DPS,
R3110DPS or R6014FS Receiver
• N
Charger
• Switch harness
• Aileron extension cord
• Neck strap
• Frequency Flag (except 2.4GHz system)
* The set contents depend on the type of set.
Transmitter T10CAP/HP
Operating system: 2-stick, 10-channel, PCM1024 or
FASST-2.4G system
Transmitting frequency: 29, 35, 36, 40, 41, 50, 72 or 75
MHz bands or 2.4GHz band
switchable
Power supply: 9.6V NT8S700B Ni-Cd battery
Receiver R6014FS (FASST-2.4G)
Receiving frequency: 2.4GHz bands
Power requirement: 4.8 - 6.0V Ni-Cd battery or regulated
output from ESC, etc.
Current drain: 70 mA
Size: 2.06 x 1.48 x 0.63 in. (52.3 x 37.5 x 16.0 mm)
Weight: 0.72 oz. (20.8 g)
Channels: 14
Receiver R1410DP (PCM Dual conversion)
Receiving frequency: 29, 35, 36, 40, 41, 50, or 72 MHz
bands
Intermediate freq.: 10.7 MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 14 mA
Size: 1.28 x 2.17 x 0.82 in. (32.6 x 55.0 x 20.8 mm)
Weight: 1.22 oz. (34.5 g)
Channels: 10
Receiver R138DP (PCM Dual conversion)
Receiving frequency: 75 MHz bands
Intermediate freq.: 10.7 MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 27 mA
Size: 2.56 x 1.42 x 0.85 in. (65 x 36 x 21.5 mm)
Weight: 1.42 oz. (40.3 g)
Channels: 8
Receiver R148DF (FM Dual conversion)
Receiving frequency: 50 or 72 MHz bands
Intermediate freq.: 10.7MHz & 455 kHz
CONTENTS AND TECHNICAL SPECIFICATIONS
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 14 mA
Size: 1.0 x 2.2 x 0.9 in. (25.4 x 55.8 x 22.9 mm)
Weight: 1.1 oz. (31.2 g)
Channels: 8
Receiver R138DF (FM Dual conversion)
Receiving frequency: 35 or 40 MHz bands
Intermediate freq.: 10.7MHz & 455 kHz
Power requirement: 4.8 - 6.0V Ni-Cd battery
Current drain: 20 mA
Size: 2.56 x 1.42 x 0.85 in. (65 x 36 x 21.5 mm)
Weight: 1.42 oz. (40.3 g)
Channels: 8
(Suggested Servo for use with your 10C system)
Servo S9252 (Digital servo)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 V (from receiver)
Output torque: 91.7 oz.-in. (6.6 kg-cm) at 4.8V
Size: 1.57 x 0.79 x 1.44 in. (40 x 20 x 36.6 mm)
Weight: 1.76 oz. (50 g)
Servo S9255 (Digital servo)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 V (from receiver)
Output torque: 125.0 oz.-in. (9.0 kg-cm) at 4.8V
Size: 1.57 x 0.79 x 1.44 in. (40 x 20 x 36.6 mm)
Weight: 1.94 oz. (55 g)
Servo S3151 (Standard, Digital servo)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 V (from receiver)
Output torque: 43.1 oz.-in. (3.1 kg-cm) at 4.8V
Size: 1.59 x 0.79 x 1.42 in. (40.5 x 20 x 36.1 mm)
Weight: 1.48 oz. (42 g)
Servo S3001 (Standard, ball-bearing)
Control system: Pulse width control, 1.52 ms neutral
Power requirement: 4.8 - 6.0V (from receiver)
Output torque: 41.7 oz.-in. (3.0 kg-cm)
Size: 1.59 x 0.78 x 1.41 in. (40.4 x 19.8 x 36 mm)
Weight: 1.59 oz. (45.1g)
9