Video Log Window - Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual

Chapter 3 Configuring and Managing the IP Camera
Table 3-25
Message
SMTP log messages.
Note
SMTP: Error during the connection or timeout.
[host: Address]
SMTP: Invalid sender address. [host: Address]
SMTP: POP before SMTP authentication failed.
[host: Address]
SMTP: Recipient address. [Address] rejected
SMTP: Send E-mail OK.
SMTP: SMTP authentication failed. [host:
Address]
SMTP: Unknown SMTP server. [host: Address]

Video Log Window

The View Video Log window lets you manage video files. If the Trigger Event option is enabled in the
Event window, the IP camera creates a video file for each event that it detects. The Video Log window
lists each video file, and lets you view, download, or delete the files.
The IP camera stores video log files in its internal SDRAM. When the SDRAM becomes full, the IP
camera stops storing additional video files or begins overwriting the oldest video files, depending on the
setting of the Overwrite/Replace oldest video file when SDRAM is full option in the Event window.
(See the
To prevent the SDRAM from becoming full, periodically delete video logs.
To display the View Video Log window, access the configuration windows as described in the
"Performing the Initial Setup of the IP Camera" section on page
Log.
Table 3-26
Note These features are not currently supported if you use the IP camera with Cisco VSM.
OL-14220-02
Syslog and Log Information (continued)
These messages appear if you enable the FTP Log option.
"Event Window" section on page 3-28
describes the option in the View Video Log window.
Explanation
Provide information when the IP camera generates
an e-mail alert and communicates with an SMTP
server.
Address is the IP address of the SMTP server.
for additional information.)
2-5, click Status, then click View Video
Cisco Video Surveillance System IP Camera User Guide
Status Windows
3-43