Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual page 36

Administration Windows
To display the Users window, access the configuration windows as described in the
Initial Setup of the IP Camera" section on page
When you make configuration settings in this window, follow these guidelines:
If you configure information in a field the Administrator area, click Change in that area or Save at
•
the bottom of the screen to save your changes.
If you configure information in the User List area, click Add next to the user or Save at the bottom
•
of the screen to save your changes.
To remove a user, click Delete next to the user. If you delete a user who is logged into the IP camera,
•
the user remains logged in and can continue access the IP camera.
To discard the changes before you click Change or Save, click Cancel.
•
The Save and Cancel buttons appear at the bottom of the window. You may need to scroll down to
•
see them.
Table 3-6
Table 3-6
Option
Administrator
User ID
User name
Password
Confirm Password
User List
User ID
User Name 1 – 20
Password
Confirm Password
Cisco Video Surveillance System IP Camera User Guide
3-14
describes the options in the Users window.
Users Window Options
Description
Display only. The user ID for the IP camera administrator is Admin.
The administrator can access the configuration windows for the IP camera,
control all IP camera functions, view video from the IP camera, and access
the Administrator windows
Display only. The user name for the IP camera administrator is admin (all
lower case).
Enter a password for the IP camera administrator.
The password must contain least 8 characters, which can be letters, numbers,
and special characters, but no spaces. It is case sensitive.
You can also set this password and configure other requirements for
Note
it in the Initialization window as described in the
Window" section on page
Re-enter the password for the administrator.
Display only. There are 20 default user IDs, User 1 through User 20.
Enter a unique name for the user.
The name can include up to 32 letters and numbers. It is case sensitive.
Enter a password for the user.
The password is case sensitive and must contain at least 8 characters, which
can be letters, numbers, and special characters, but no spaces. Special
characters are: ! " # $ % & ' ( ) * + , - . : ; < = > ? @ [ \ ] ^ _ ` { | } ~.
Re-enter the password for the user.
Chapter 3 Configuring and Managing the IP Camera
2-5, click Administration, then click Users.
3-23.
"Performing the
"Initialization
OL-14220-02