Syslog & Log Window - Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual

Status Windows
Table 3-23
Option
Primary DNS
Secondary DNS
Wireless
Note
SSID
Channel
Connection Speed
Security
Syslog & Log Window
The Syslog & Log window lets you manage the IP camera log file, which captures and stores information
about the IP camera and its activities.
The IP camera captures the information that you specify and stores the log file in its internal SDRAM.
If the SDRAM becomes full, the IP camera begins to overwrite existing information. To prevent this
situation, configure the IP camera to send log information to a Syslog server and periodically clear log
information from SDRAM manually by using the Clear Log option in the Syslog & Log window.
The camera also maintains a video log file. For more information, see the
Note
on page
To display the Syslog & Log window, access the configuration windows as described in the
the Initial Setup of the IP Camera" section on page
Table 3-24
These features are not currently supported if you use the IP camera with Cisco VSM.
Note
Cisco Video Surveillance System IP Camera User Guide
3-38
Network Window Options (continued)
Description
IP address of the primary Domain Name Server (DNS).
IP address of the secondary DNS.
These options apply to the wireless IP camer model only.
Wireless SSID.
Wireless channel in use.
Speed and type of the wireless IP camera connection to the network.
Security setting for wireless connections.
3-43.
describes the options in the Syslog & Log window.
Chapter 3 Configuring and Managing the IP Camera
"Video Log Window" section
2-5, click Status, then click Syslog & Log.
"Performing
OL-14220-02