Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual page 30

Setup Windows
Table 3-3
Option
Wireless Settings
SSID
Network Type
Security
Edit Security Settings /
Hide Security Settings
toggle button
Security Mode
WEP Security Mode Options
Note
TX Key
WEP Encryption
Cisco Video Surveillance System IP Camera User Guide
3-8
Wireless Setup Window Options
Description
Enter the service set identifier (SSID) that is used by wireless devices on
your network.
The SSID can be any combination of up to 32 of alpha, numeric, and special
characters. It is case sensitive.
The default value is cisco (all lower case). For increased security, change this
value to an SSID of your choice.
Display only. Displays information about the network infrastructure.
Display only. If security is enabled for the IP camera, displays the security
mode that is configured.
Click the Edit Security Settings button to display the Security Mode
drop-down list. Click the Hide Security Settings to hide this drop-down list.
If you clicked the Edit Security Settings button, choose the desired security
mode for the IP camera:
Disabled—No security is used. Data is not encrypted before
•
transmission and anyone using the correct SSID can connect to the
camera through your network.
WEP—The 802.11b standard and a basic encryption method. The
•
encryption system is not as strong as other methods, but it is supported
by all clients.
WPA/WPA2 Personal—This method, sometimes called mixed mode,
•
allows clients to use either WPA-PSK (with TKIP) or WPA2-PSK (with
AES) encryption methods.
WPA/WPA2 Enterprise—Data transmissions are encrypted using
•
either the WPA or WPA2 standard. Requires that RADIUS be
configured on your network to provide the client authentication.
These options appear if you choose WEP from the Security Mode drop-down list.
If you enter a WEP key in one of the Key fields, choose the number of the
field that contains the key to use.
For added security, you can periodically change the TX Key option to
designate a different WEP key.
Select the WEP encryption strength:
64 Bit Keys (10 Hex characters)—Designates 64 bit encryption keys
•
with 10 hexadecimal characters
128 Bit Keys (26 Hex characters)—Designates 128 bit encryption keys
•
with 26 hexadecimal characters
Chapter 3 Configuring and Managing the IP Camera
OL-14220-02