Status Windows
Table 3-25
Message
System: Cancel upgrade process
System: Invalid upgrade file
System: Reset to factory defaults.
Unsuccessful login attempt.
Web: Invalid login attempt. [id: User_ID, ip:
Address]
Web: User logged in to web UI. [id: User_ID, ip:
Address]
Web: User logged out from web UI. [id: User_ID,
ip: Address]
Wireless: Link down by AP when receiving
DeAuth.
Wireless: Link down by STA when changing
SSID.
Wireless: Link down when losing BEACON.
Wireless: Link up.
FTP log messages.
Note
FTP: Error during the connection or timeout.
[host: Address]
FTP: File uploading failed. [host: Address]
FTP: File uploaded successfully. [host: Address]
FTP: Login failed. [host: Address]
FTP: No such remote path. [host: Address]
FTP: Unknown FTP server. [host: Address]
Cisco Video Surveillance System IP Camera User Guide
3-42
Syslog and Log Information (continued)
These messages appear if you enable the FTP Log option.
Chapter 3
Configuring and Managing the IP Camera
Explanation
An IP camera administrator cancelled a firmware
upgrade that was in process.
You are attempting to upgrade firmware for the IP
camera but are using and invalid firmware file.
Factory reset procedure performed for the IP
camera.
A user tried but was unable to log in to the IP
camera.
Provides information when someone logs in, or
attempts to log in, to the IP camera.
User is the IP camera user name of the user.
Address is the IP address of the PC that was used.
Wireless IP camera cannot communicate with the
access point.
A user is changing the SSID for the wireless IP
camera.
Wireless IP camera cannot communicate with the
access point because the access point is shutting
down.
Wireless IP camera established connection to the
access point.
Provide information when the camera uploads a
video file to the FTP server.
Address is the IP address of the FTP server.
OL-14220-02
Need help?
Do you have a question about the CIVS-IPC-2500W - Video Surveillance IP Camera Network and is the answer not in the manual?