Video Log Window - Cisco 2500 Series User Manual

Status Windows
Table 3-26
Message
FTP log messages.
Note
FTP: Error during the connection or timeout.
[host: Address]
FTP: File uploading failed. [host: Address]
FTP: File uploaded successfully. [host: Address]
FTP: Login failed. [host: Address]
FTP: No such remote path. [host: Address]
FTP: Unknown FTP server. [host: Address]
SMTP log messages.
Note
SMTP: Error during the connection or timeout.
[host: Address]
SMTP: Invalid sender address. [host: Address]
SMTP: POP before SMTP authentication failed.
[host: Address]
SMTP: Recipient address. [Address] rejected
SMTP: Send E-mail OK.
SMTP: SMTP authentication failed. [host:
Address]
SMTP: Unknown SMTP server. [host: Address]

Video Log Window

The View Video Log window lets you manage video files. If the Trigger Event option is enabled in the
Event window, the IP camera creates a video file for each event that it detects. The Video Log window
lists each video file, and lets you view, download, or delete the files.
The IP camera stores video log files in its internal SDRAM. When the SDRAM becomes full, the IP
camera stops storing additional video files or begins overwriting the oldest video files, depending on the
setting of the Overwrite/Replace oldest video file when SDRAM is full option in the Event window.
(See the
To prevent the SDRAM from becoming full, periodically delete video logs.
To display the View Video Log window, access the configuration windows as described in the
"Accessing the IP Camera Windows" section on page
Table 3-27
Cisco Video Surveillance 2500 Series IP Camera User Guide
3-46
Syslog and Log Information (continued)
These messages appear if you enable the FTP Log option.
These messages appear if you enable the FTP Log option.
"Event Window" section on page 3-31
describes the option in the View Video Log window.
Chapter 3 Configuring and Managing the IP Camera
Explanation
Provide information when the camera uploads a
video file to the FTP server.
Address is the IP address of the FTP server.
Provide information when the IP camera generates
an e-mail alert and communicates with an SMTP
server.
Address is the IP address of the SMTP server.
for additional information.)
2-6, click Status, then click View Video Log.
OL-19273-02