Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual page 62

Status Windows
Table 3-25
Message
Audio: Disable microphone.
Audio: Disable speaker.
Audio: Enable microphone. (audio type: G.711
A-Law)
Audio: Enable microphone. (audio type: G.711
u-Law)
Audio: Enable microphone. (audio type: G.726)
Audio: Enable speaker.
DHCP: Lease release successfully.
DHCP: Lease release unsuccessfully.
DHCP: Lease renewal successfully.
DHCP: Lease renewal unsuccessfully.
DHCP: Timeout error when renewing DHCP
lease.
DST: Adjust DST Number hour automatically.
DST: DST begin.
DST: DST end.
LOG: Clear all messages.
LOG: Log file is full. Start to wrap around.
Network: Failed to get the IP address. Camera set
to default IP address.
Network: LAN activated.
Network: Wired link down.
Network: Wired link up.
Network: Wireless activated.
NTP: Failed to synchronize data & time with the
NTP server.
NTP: No NTP server specified.
NTP: Synchronization OK.
NTP: The NTP server cannot be reached.
Cisco Video Surveillance System IP Camera User Guide
3-40
Syslog and Log Information (continued)
Chapter 3 Configuring and Managing the IP Camera
Explanation
Captures information when audio devices are
enabled or disabled in the Audio window.
Provides information about DHCP activities in
networks that include DHCP.
The IP camera has automatically adjusted its clock
by the indicated number of hours for the beginning
or end of daylight saving time.
The IP camera has adjusted its clock for the
beginning of daylight saving time.
The IP camera has adjusted its clock for the end of
daylight saving time.
You have used the Clear Log button to delete the
log file from the IP camera SDRAM.
The IP camera SDRAM is full and existing log
information is beginning to be overwritten.
IP camera is unable to obtain an IP address
through DHCP and is set to the default IP address
of 192.168.0.100.
IP camera obtained a network IP address.
Wired IP camera lost connection to the network.
Wired IP camera established connection to the
network.
IP camera wireless model successfully associated
with an access point and obtained an IP address
Provides information when you configure the IP
camera to obtains its time from an NTP server.
OL-14220-02