Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual page 63

Chapter 3 Configuring and Managing the IP Camera
Table 3-25
Message
output: Failed to set output port Port_Number.
output: Set output port Port_Number to high OK.
output: Set output port Port_Number to low OK.
output: Set output port Port_Number to pulse OK.
PTZ: Focus far.
PTZ: Focus near.
PTZ: Go to home.
PTZ: Go to Preset Position_Number.
PTZ: Move down.
PTZ: Move left.
PTZ: Move right.
PTZ: Move up.
PTZ: Zoom in.
PTZ: Zoom out.
Sensor: Change from Day mode to Night mode.
Sensor: Change from Night mode to Day mode.
Stream: HTTP stream started. [id: User, ip:
Address]
Stream: HTTP stream stopped. [id: User, ip:
Address]
Stream: RTSP stream started. [ip: Type, UDP:
Address_1:Port_1 -> Address_2:Port_2, User]
Stream: RTSP stream stopped. [ip: Type, UDP:
Address_1:Port_1 -> Address_2:Port_2, User]
successful admin user login.
successful view only user login.
OL-14220-02
Syslog and Log Information (continued)
Explanation
Provides information when you configure the
output ports on the IP camera.
A user clicked the Focus Far button in the Home
window.
A user clicked the Focus Near button in the Home
window.
A user clicked the Move Camera Home button in
the Home window.
Provides information when you pan or tilt the IP
camera or it move it to a preset position.
The IP camera switched from day mode to night
mode.
The IP camera switched from night mode to day
mode.
Provides information when a user accesses (HTTP
stream started) or exits (HTTP stream stopped) the
Home window.
User is the IP camera user name of the user.
Address is the IP address of the PC that was used.
Provides information when an RTSP stream from
the IP camera is initiated (RTSP stream started) or
stopped (RTSP stream stopped).
Type is the type of stream (Video or Audio).
Address_1:Port_1 are the IP address and port
number of the IP camera. Address_2:Port_2 are IP
address and port number of the device that
receives the stream. User is the IP camera user
name of the user who started or stopped the
stream.
A user with administrator privileges logged in to
the IP camera.
A user with viewer privileges or monitor
privileges logged in to the IP camera.
Cisco Video Surveillance System IP Camera User Guide
Status Windows
3-41