System Window; Audio/Video Window - Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual

Status Windows

System Window

The System window displays information about the IP camera.
To display the System window, access the configuration windows as described in the
Initial Setup of the IP Camera" section on page
To make sure that the System window shows the most current information, click the Refresh button.
Table 3-21
This window is not currently supported if you use the IP camera with Cisco VSM.
Note
Table 3-21
Option
System Status
Firmware Version
Hardware Version
Sensor Firmware
Version
MAC Address
Camera Name
Description
Date/Time
UDI
Note
Product Identifier
Version Identifier
Serial Number
Entity Name
Product Description

Audio/Video Window

The Audio/Video window displays information about the audio and video streams from the IP camera.
You configure audio options as described in the
video options as described in the
To display the Audio/Video window, access the configuration windows as described in the
the Initial Setup of the IP Camera" section on page
To make sure that the Audio/Video window shows the most current information, click the Refresh
button.
Cisco Video Surveillance System IP Camera User Guide
3-36
describes the options in the System window. All options are for display only.
System Window Options
Description
Version of the firmware that is installed on the IP camera.
Not used.
Version of the sensor firmware that is installed by the factory on the IP
camera.
MAC address of the IP camera.
Name of the IP camera, as configured in the Basic Setup window. For more
information, see the
Description of the IP camera, as configured in the Basic Setup window. For
more information, see the
Current date and time of the IP camera. To set the date and time, see the
"Basic Setup Window" section on page
The Unique Device Identifier (UDI) provides information about Cisco devices.
Cisco product ID of the IP camera.
Not used.
Serial number of the IP camera.
Cisco top level assembly part number of the IP camera.
Revision of the Cisco top level assembly part number.
"Video Window" section on page
Chapter 3 Configuring and Managing the IP Camera
2-5, click Status, then click System.
"Basic Setup Window" section on page
"Basic Setup Window" section on page
3-5.
"Audio Window" section on page
3-17.
2-5, click Status, then click Image.
"Performing the
3-5.
3-5.
3-20. You configure
"Performing
OL-14220-02