F/W Upload Screen; Figure 96 Firmware Upload; Table 81 Firmware Upload - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual
4-port wireless router
Hide thumbs
Also See for ZyAir G-2000 PlusV2:
- Quick start manual (13 pages) ,
- Declaration of conformity (1 page) ,
- Release note (10 pages)
Table of Contents
Advertisement
ZyXEL G-2000 Plus v2 User's Guide
18.5 F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
"*.bin" extension, e.g., "zyxel.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
See the Firmware and Configuration File Maintenance chapter for upgrading firmware using
FTP/TFTP commands.
Click MAINTENANCE and then F/W Upload. Follow the instructions in this screen to
upload firmware to your ZyXEL device.
Figure 96 Firmware Upload
The following table describes the labels in this screen.
Table 81 Firmware Upload
LABEL
File Path
Browse...
Upload
Note: Do not turn off the ZyXEL device while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyXEL device again.
228
Type in the location of the file you want to upload in this field or click Browse ...
to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
DESCRIPTION
Chapter 18 Maintenance
Advertisement
Table of Contents
Troubleshooting
