Applying Remote Node Filters; Figure 170 Filtering Lan Traffic; Figure 171 Filtering Remote Node Traffic - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

ZyXEL G-2000 Plus v2 User's Guide

Figure 170 Filtering LAN Traffic

28.6.2 Applying Remote Node Filters

Go to menu 11.5 (shown below – note that call filter sets are only present for PPPoE
encapsulation) and enter the number(s) of the filter set(s) as appropriate. You can cascade up
to four filter sets by entering their numbers separated by commas. The ZyXEL device already
has filters to prevent NetBIOS traffic from triggering calls, and block incoming telnet, FTP
and HTTP connections.

Figure 171 Filtering Remote Node Traffic

310
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Chapter 28 Filter Configuration