Table 44 Trigger Port - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

ZyXEL G-2000 Plus v2 User's Guide

Table 44 Trigger Port

LABEL
#
Name
Incoming
Start Port
End Port
Trigger
Start Port
End Port
Apply
Reset
128
DESCRIPTION
This is the rule index number (read-only).
Type a unique name (up to 15 characters) for identification purposes. All characters
are permitted - including spaces.
Incoming is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The ZyXEL device forwards the traffic with this port (or range
of ports) to the client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the ZyXEL
device to record the IP address of the LAN computer that sent the traffic to a server on
the WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Click Apply to save your changes back to the ZyXEL device.
Click Reset to begin configuring this screen afresh.
Chapter 8 Single User Account (SUA) / Network Address Translation (NAT)