The Filter Structure Of The Zyxel Device - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual
4-port wireless router
Hide thumbs
Also See for ZyAir G-2000 PlusV2:
- Quick start manual (13 pages) ,
- Declaration of conformity (1 page) ,
- Release note (10 pages)
Table of Contents
Advertisement
ZyXEL G-2000 Plus v2 User's Guide
28.1.1 The Filter Structure of the ZyXEL device
A filter set consists of one or more filter rules. Usually, you would group related rules, e.g., all
the rules for NetBIOS, into a single set and give it a descriptive name. The ZyXEL device
allows you to configure up to twelve filter sets with six rules in each set, for a total of 72 filter
rules in the system. You cannot mix device filter rules and protocol filter rules within the same
set. You can apply up to four filter sets to a particular port to block multiple types of packets.
With each filter set having up to six rules, you can have a maximum of 24 rules active for a
single port.
Sets of factory default filter rules have been configured in menu 21 to prevent NetBIOS traffic
from triggering calls and to prevent incoming telnet sessions. A summary of their filter rules is
shown in the figures that follow.
The following figure illustrates the logic flow when executing a filter rule. See also
164
for the logic flow when executing an IP filter.
296
see Figure
Chapter 28 Filter Configuration
Advertisement
Table of Contents
Troubleshooting
