This chapter shows you how to configure wired Local Area Network (LAN) settings on your
ZyXEL device.
22.1 LAN Setup
This section describes how to configure the Ethernet using Menu 3 – LAN Setup. From the
main menu, enter 3 to display menu 3.
Figure 116 Menu 3 LAN Setup
22.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You
seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain
packets, reduce traffic and prevent security breaches
Figure 117 Menu 3.1 LAN Port Filter Setup.
If you need to define filters, please read the Filter Set Configuration chapter first, then return
to this menu to define the filter sets.
Chapter 22 LAN Setup
.
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
5. Wireless LAN Setup
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
ZyXEL G-2000 Plus v2 User's Guide
C
H A P T E R
LAN Setup
2 2
247