Figure 97 Firmware Upload In Process; Figure 98 Network Temporarily Disconnect - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

ZyXEL G-2000 Plus v2 User's Guide

Figure 97 Firmware Upload In Process

The ZyXEL device automatically restarts in this time causing a temporary network disconnect.
In some operating systems, you may see the following icon on your desktop.

Figure 98 Network Temporarily Disconnect

After two minutes, log in again and check your new firmware version in the System Status
screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
Chapter 18 Maintenance 229