Chapter 36 Call Scheduling; Introduction To Call Scheduling; Figure 205 Menu 26 Schedule Setup - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you to dictate
when a remote node should be called and for how long.

36.1 Introduction to Call Scheduling

The call scheduling feature allows the ZyXEL device to manage a remote node and dictate
when a remote node should be called and for how long. This feature is similar to the scheduler
in a videocassette recorder (you can specify a time period for the VCR to record). You can
apply up to 4 schedule sets in Menu 11.1 — Remote Node Profile. From the main menu,
enter 26 to access Menu 26 — Schedule Setup as shown next.

Figure 205 Menu 26 Schedule Setup

Schedule
Set #
------
1
2
3
4
5
6
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling
conflicts. For example, if sets 1, 2 ,3 and 4 in are applied in the remote node then set 1 will
take precedence over set 2, 3 and 4 as the ZyXEL device, by default, applies the lowest
numbered set first. Set 2 will take precedence over set 3 and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a
remote node.
Note:
To delete a schedule set, enter the set number and press [SPACE BAR] and then
[ENTER] (or delete) in the Edit Name field.

Chapter 36 Call Scheduling

Menu 26 - Schedule Setup
Name
-----------------
_______________
_______________
_______________
_______________
_______________
_______________
Enter Schedule Set Number to Configure=
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
ZyXEL G-2000 Plus v2 User's Guide
C
H A P T E R
Call Scheduling
Schedule
Set #
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
3 6
Name
359