ZyXEL G-2000 Plus v2 User's Guide
13.5.3 Configuring SNMP
To change your ZyXEL device's SNMP settings, click REMOTE MGMT, then the SNMP
tab. The screen appears as shown.
Figure 72 Remote Management: SNMP
The following table describes the labels in this screen.
Table 59 Remote Management: SNMP
LABEL
SNMP Configuration
Get Community
Set Community
Trusted Host
Trap
Community
174
DESCRIPTION
Enter the Get Community, which is the password for the incoming Get and
GetNext requests from the management station. The default is public and allows
all requests.
Enter the Set community, which is the password for incoming Set requests
from the management station. The default is public and allows all requests.
If you enter a trusted host, your ZyXEL device will only respond to SNMP
messages from this address. A blank (default) field means your ZyXEL device
will respond to all SNMP messages it receives, regardless of source.
Type the trap community, which is the password sent with each trap to the
SNMP manager. The default is public and allows all requests.
Chapter 13 Remote Management Screens