Configuring Telnet; Figure 67 Remote Management: Www; Table 55 Remote Management: Www - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

Figure 67 Remote Management: WWW

The following table describes the labels in this screen.

Table 55 Remote Management: WWW

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

13.3 Configuring TELNET

You can configure your ZyXEL device for remote Telnet access as shown next. The
administrator uses Telnet from a computer on a remote network to access the ZyXEL device.
Chapter 13 Remote Management Screens
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL device
using this service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL device using this service.
Select All to allow any computer to access the ZyXEL device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL device using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
ZyXEL G-2000 Plus v2 User's Guide
169