Guidelines For Enhancing Security With Your Firewall; Packet Filtering Vs Firewall; Packet Filtering - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

Consider the FTP protocol. A user on the LAN opens a control connection to a server on the
Internet and requests a file. At this point, the remote server will open a data connection from
the Internet. For FTP to work properly, this connection must be allowed to pass through even
though a connection from the Internet would normally be rejected.
In order to achieve this, the ZyXEL device inspects the application-level FTP data.
Specifically, it searches for outgoing "PORT" commands, and when it sees these; it adds a
cache entry for the anticipated data connection. This can be done safely, since the PORT
command contains address and port information, which can be used to uniquely identify the
connection.
Any protocol that operates in this way must be supported on a case-by-case basis. You can use
the web configurator's Custom Services feature to do this.

10.6 Guidelines For Enhancing Security With Your Firewall

1 Change the default password via SMT or web configurator.
2 Think about access control before you connect a console port to the network in any way,
including attaching a modem to the port. Be aware that a break on the console port might
give unauthorized individuals total control of the firewall, even with access control
configured.
3 Limit who can telnet into your router.
4 Don't enable any local service (such as SNMP or NTP) that you don't use. Any enabled
service could present a potential security risk. A determined hacker might be able to find
creative ways to misuse the enabled services to access the firewall or the network.
5 For local services that are enabled, protect against misuse. Protect by configuring the
services to communicate only with specific peers, and protect by configuring rules to
block packets for the services at specific interfaces.
6 Protect against IP spoofing by making sure the firewall is active.
7 Keep the firewall in a secured (locked) room.

10.7 Packet Filtering Vs Firewall

Below are some comparisons between the ZyXEL device's filtering and firewall functions.

10.7.1 Packet Filtering:

• The router filters packets as they pass through the router's interface according to the filter
rules you designed.
• Packet filtering is a powerful tool, yet can be complex to configure and maintain,
especially if you need a chain of rules to filter a service.
• Packet filtering only checks the header portion of an IP packet.
Chapter 10 Firewalls
ZyXEL G-2000 Plus v2 User's Guide
143