ZyXEL Communications ZyAir G-2000 PlusV2 User Manual page 49

Table 3 Web Configurator Screens Summary (continued)
LINK
ADVANCED
MAINTENANCE
LOGOUT
Chapter 2 Introducing the Web Configurator
SUB-LINK FUNCTION
SYSTEM Use this screen to configure general information, dynamic DNS,
change your password and configure the time settings.
LAN Use this screen to configure LAN TCP/IP settings, enable IP
Alias and other advanced properties.
WIRELESS Use this screen to configure the wireless LAN settings and
WLAN authentication/security settings. You can also activate
your roaming configuration.
WAN This screen allows you to configure ISP parameters, WAN IP
address assignment, DNS servers and other advanced
properties.
SUA/NAT Use this screen to configure SUA/NAT settings.
STATIC ROUTE Use this screen to configure IP static routes.
FIREWALL Use this screen to activate/deactivate the firewall as well as
add, edit or delete firewall rules on the ZyXEL device.
CONTENT Use this screen to configure content filtering settings on the
FILTER ZyXEL device.
REMOTE MGNT Use this screen to configure port addresses and security
settings for Telnet, FTP, WWW, SNMP and DNS protocols on
the ZyXEL device.
UPNP Use this screen to enable UPnP on the ZyXEL device.
AUTH. SERVER Use this screen to edit Internal RADIUS Server Settings,
Trusted AP accounts and Trusted User databases.
CERTIFICATES Use this screen to generate and export self-signed certificates
or certification requests and import the ZyXEL device's CA-
signed certificates. You can also use this screen to save CA
certificates to the Prestige.
LOGS Use this screen to view logs, setup log settings and create
reports for the categories that you selected.
These screens to upload firmware, backup and restore
configuration or restore the ZyXEL device to its factory defaults.
These screens also lets you view the status of the ZyXEL
device and lets you perform a restart.
Click this icon to exit the web configurator.
ZyXEL G-2000 Plus v2 User's Guide
49