Macintosh Os 8/9; Macintosh Os X; Figure 216 Windows Xp: Internet Protocol (Tcp/Ip) Properties; Verifying Settings - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual
4-port wireless router
Hide thumbs
Also See for ZyAir G-2000 PlusV2:
- Quick start manual (13 pages) ,
- Declaration of conformity (1 page) ,
- Release note (10 pages)
Table of Contents
Advertisement
ZyXEL G-2000 Plus v2 User's Guide
Figure 216 Windows XP: Internet Protocol (TCP/IP) Properties
8 Click OK to close the Internet Protocol (TCP/IP) Properties window.
9 Click OK to close the Local Area Connection Properties window.
10Turn on your ZyXEL device and restart your computer (if prompted).
Verifying Settings
1 Click Start, All Programs, Accessories and then Command Prompt.
2 In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can
also open Network Connections, right-click a network connection, click Status and then
click the Support tab.
Macintosh OS 8/9
1 Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP
Control Panel.
376
•
Click Obtain DNS server address automatically if you do not know
your DNS server IP address(es).
•
If you know your DNS server IP address(es), click Use the following
DNS server addresses, and type them in the Preferred DNS server
and Alternate DNS server fields.
If you have previously configured DNS servers, click Advanced and
then the DNS tab to order them.
Advertisement
Table of Contents
Troubleshooting
