Network Configuration Menu - Cisco 7985G - IP Phone NTSC Video Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Video Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
TFTP Server 1 Primary Trivial File Transfer
Protocol (TFTP) server that the
phone uses. By default, this server
equals CiscoCM1. If you are not
using DHCP in your network and
you want to change this default
server, you must use the TFTP
Server 1 option.
If you set the Alternate TFTP
option to yes, you must enter a
non-zero value for the TFTP Server
1 option.
TFTP Server 2 Optional backup TFTP server that
the phone uses if the primary TFTP
server is unavailable.
Default Router Default router that the phone uses.
OL-8726-02
To Change
If DHCP is enabled, set the Alternate
1.
TFTP option to Yes.
Scroll to the TFTP Server 1 option, press
2.
Edit, and then enter a new TFTP server IP
address.
Press Validate and then Save.
3.
Unlock network configuration options.
1.
Enter an IP address for the TFTP Server 1
2.
option.
3. Scroll to the TFTP Server 2 option, press
Edit, and then enter a new backup TFTP
server IP address.
Press Validate and then Save.
4.
Unlock network configuration options.
1.
Set the DHCP Enabled option to No.
2.
Scroll to the appropriate Default Router
3.
option, press Edit and then enter a new
router IP address.
Press Validate.
4.
Press Save.
5.
Cisco Unified IP Video Phone 7985G Administration Guide

Network Configuration Menu

4-8