Cisco 7985G - IP Phone NTSC Video Administration Manual page 83

Configuring Features, Templates,
Services, and Users
After you install Cisco Unified IP Phones in your network, configure their
network settings, and add them to Cisco Unified CallManager, you must use
Cisco Unified CallManager Administration to configure telephony features,
optionally modify phone templates, set up services, and assign users.
This chapter provides an overview of these configuration and setup procedures.
Cisco Unified CallManager documentation provides detailed instructions for
these procedures.
For suggestions about how to provide users with information about features, and
what information to provide, see
Via a Website."
This chapter includes following topics:
•
•
•
•
•
•
OL-8726-02
Telephony Features that are Available for the Phone, page 5-2
Configuring Corporate Directories, page 5-6
Modifying Phone Button Templates, page 5-7
Configuring Softkey Templates, page 5-7
Setting Up Services, page 5-8
Adding Users to Cisco Unified CallManager, page 5-9
Cisco Unified IP Video Phone 7985G Administration Guide
C H A P T E R
Appendix A, "Providing Information to Users
5
5-1