Providing Power To The Phone; Power Gudielines; Power Outage - Cisco 7985G - IP Phone NTSC Video Administration Manual

Chapter 2 Preparing to Install the Cisco Unified IP Video Phone on Your Network

Providing Power to the Phone

Note
OL-8726-02
Network Configuration Menu, page 4-6
•
The Cisco Unified IP Video Phone 7985G can be powered with external power or
with Power over Ethernet (PoE). External power is provided through a separate
power supply. PoE is provided by a switch through the Ethernet cable attached to
a phone.
When you install a phone that is powered with external power, connect the power
supply to the phone and to a power outlet before you connect the Ethernet cable
to the phone. When you remove a phone that is powered with external power,
disconnect the Ethernet cable from the phone before you disconnect the power
supply.
These sections provide more information about powering a phone:
Power Gudielines, page 2-5
•
• Power Outage, page 2-5
Obtaining Additional Information about Power, page 2-6
•
Cisco Unified IP Video Phone 7985G Administration Guide
Providing Power to the Phone
2-4