Power Gudielines; Power Outage - Cisco 7985G - IP Phone NTSC Video Administration Manual

Chapter 2 Preparing to Install the Cisco Unified IP Video Phone on Your Network

Power Gudielines

Table 2-1 Guidelines for Powering the Cisco Unified IP Video Phone 7985G
Power Type
External power—
Provided through the
CP-PWR-CUBE-3 or
CP-PWR-CUBE-2
external power supply
PoE power—Provided by
a switch through the
Ethernet cable attached to
the phone

Power Outage

OL-8726-02
Table 2-1 provides guidelines that apply to external power and to PoE power for
the Cisco Unified IP Video Phone 7985G.
Guidelines
The Cisco Unified IP Video Phone 7985G is compatible with the
•
CP-PWR-CUBE-3 external power supply only.
The inline power patch panel WS-PWR-PANEL is not compatible
•
with the Cisco Unified IP Video Phone.
To ensure uninterruptible operation of the phone, make sure that the
•
switch has a backup power supply.
Make sure that the CatOS or IOS version running on your switch
•
supports your intended phone deployment. Refer to the documentation
for your switch for operating system version information.
Your accessibility to emergency service through the phone is dependent on the
phone being powered. If there is an interruption in the power supply, Service and
Emergency Calling Service dialing will not function until power is restored. In the
case of a power failure or disruption, you may need to reset or reconfigure
equipment before using the Service or Emergency Calling Service dialing.
Cisco Unified IP Video Phone 7985G Administration Guide
Providing Power to the Phone
2-5