Model Information Screen; Call Status Screen - Cisco 7985G - IP Phone NTSC Video Administration Manual

Chapter 7 Viewing Model Information, Call Status, Current Settings, Default Settings, and Call Statistics on the Cisco

Model Information Screen

Call Status Screen

OL-8726-02
The Model Information screen shows the following information:
• Model Number—Model number of the phone.
MAC Address—MAC address of the phone.
•
App Load ID—Identifier of the factory-installed load that is running on the
•
phone.
Boot Load ID—Identifier of the factory-installed load that is running on the
•
phone.
Serial Number—Serial number of the phone.
•
To display the Model Information screen, press Settings > Model Information.
To exit the Model Information screen, press Exit.
You can access comprehensive information about the call through the Call Status
menu. The menu provides two columns: one for transmitter and one for received
audio and video information. The Call Status menu contains the following
information:
System Name
•
Call rate (kbps)
•
Video protocol
•
Audio protocol
•
Video format
•
• Video rate (kbps)
Audio rate (kbps)
•
Packet loss (%)
•
To display the Call Status screen, press Settings > Call Status. To exit the Call
Status screen, press Exit.
Cisco Unified IP Video Phone 7985G Administration Guide
Model Information Screen
7-2