Cisco 7985G - IP Phone NTSC Video Administration Manual page 85

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Video Phone (continued)
Feature
Barge
Call park
Call pickup
Call waiting
Caller ID
OL-8726-02
Description
Allows a user to join an in-progress call on
a shared line. Phones support Barge in two
conference modes:
Built-in conference bridge at the target
•
device (the phone that is being barged).
This mode uses the Barge softkey.
Shared conference bridge. This mode
•
uses the cBarge softkey.
The 7985G does not have a Built-in
Note
conference bridge, so barging into a
7985G call is not supported.
Places the call on hold, so anyone that is
connected to the Cisco
Unified CallManager system can retrieve
the call.
Picks up incoming calls within a group.
Receives a second incoming call on the
same line without disconnecting the first
call.
Displays the telephone number and name of
the caller.
Telephony Features that are Available for the Phone
Cisco Unified IP Video Phone 7985G Administration Guide
Configuration Reference
Refer to Cisco Unified
CallManager Features and
Services Guide.
Refer to Cisco Unified
•
CallManager Administration
Guide.
Refer to Cisco Unified
•
CallManager Features and
Services Guide.
Refer to Cisco Unified
•
CallManager Administration
Guide.
Refer to Cisco Unified
•
CallManager System Guide.
Refer to Cisco Unified
•
CallManager Administration
Guide.
Refer to Cisco Unified
•
CallManager System Guide.
Refer to Cisco Unified
CallManager Administration
Guide.
5-3