Appendix; Updating Firmware For The Cisco Unified Ip Video Phone 7985G - Cisco 7985G - IP Phone NTSC Video Administration Manual

Updating Firmware for the Cisco
Unified IP Video Phone 7985G
You update the firmware on a Cisco Unified IP Video Phone 7985G by using
Cisco Unified CallManager Administration application. You cannot update the
firmware from the Cisco Unified IP Phones directly.
To determine the firmware version that is currently running on a phone, see the
"Call Statistics Screen" section on page
To update firmware, perform the following steps.
Read the "Read Me" files that are included with Cisco software updates. These
Note
files provide important updated information about installing and configuring the
new software.
Procedure
Obtain an updated phone load.
Step 1
You can download the latest available software from the Cisco Service & Support
Software Center:
http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml
Install the updated phone load.
Step 2
From Cisco Unified CallManager Administration choose System > Device
Step 3
Defaults and locate the Device Type field that corresponds to the model IP phone.
OL-8726-02
A P P E N D I X
7-3.
Cisco Unified IP Video Phone 7985G Administration Guide
B
B-1