Cisco 7985G - IP Phone NTSC Video Administration Manual page 40

Chapter 1 An Overview of the Cisco Unified IP Video Phone
Understanding the Requirements for Installing and Configuring the Cisco Unified IP Video Phone 7985G
Table 1-2 Cisco Unified IP Video Phone Installation and Configuration Checklist (continued)
Required Task
Decide how you want to add
3.
phones to the Cisco
Unified CallManager
database:
With auto-registration
–
With Cisco Unified
–
CallManager
Administration only
With the
–
Bulk Administration Tool
(BAT) only
With BAT and the Tool for
–
Auto-Registered Phones
Support (TAPS)
Obtain the MAC address from
4.
the IP video phone.
OL-8726-02
Purpose
Determines how the directory
number is assigned and whether
you need to obtain a MAC address
first, among other things.
The system does not
Note
support auto-registration
when security is
implemented.
Becomes necessary if you plan to
add phones to the Cisco
Unified CallManager database by
using auto-registration only or in
conjunction with the Tool for
Auto-Registered Phones Support
(TAPS).
You can determine a phone MAC
address in these ways:
• From the phone, choose
Settings > Model
Information and look at the
MAC Address field.
Display the phone's web page
•
and click the Device
Information hyperlink.
Cisco Unified IP Video Phone 7985G Administration Guide
For More Information
See the "Adding Phones
•
to the Cisco Unified
CallManager Database"
section on page 2-10.
Refer to CiscoUnified
•
CallManager
Administration Guide.
Refer to Bulk
•
Administration Tool
Guide for Cisco
Unified CallManager
See the "Model
•
Information Screen"
section on page 7-2.
1-14