Adjusting The Handset Volume; Adjusting The Speaker Volume - Cisco 7910 - IP Phone VoIP Getting Started Manual

Chapter 3 Using the Cisco IP Phone 7910 Series

Adjusting the Handset Volume

Step 1
Step 2
Step 3
Step 4

Adjusting the Speaker Volume

Step 1
Step 2
Step 3
Step 4
78-11443-02
You can temporarily change the handset volume while on a call by pressing the
volume up/down keys. Your change only affects the current call.
To change the volume of your handset and save it as the default volume setting:
Press the Settings button. Optionally, lift the handset before pressing Settings so
you can hear the volume as you adjust it.
Press 1 on the key pad.
Press the up or down volume keys to adjust the volume to the desired level.
To save the volume setting for future calls, press # on the key pad and then press
the Settings button to exit the Settings menu.
You can temporarily change the speaker volume while on a call by pressing the
volume up/down keys. Your change only affects the current call.
To change the volume of your speaker and save it as the default volume setting:
Press the Settings button. Optionally, press Speaker before pressing Settings so
you can hear the volume as you adjust it.
Press 2 on the key pad.
Press the up or down volume keys to adjust the volume to the desired setting.
To save the volume setting for future calls, press # on the key pad and then press
the Settings button to exit the Settings menu.
How to Use the Handset and Speaker
Getting Started with the Cisco IP Phone 7910 Series
3-3