Chapter 2 Installing The Cisco Ip Phone 7910 Series; Safety Notices - Cisco 7910 - IP Phone VoIP Getting Started Manual

Installing the
Cisco IP Phone 7910 Series
Before you can successfully install the phone, your system administrator must
prepare the network for your phone. If a technician is not installing your phone,
verify with the system administrator that the network is ready for the phone, read
the safety notices, and install the phone.
These sections help you install the Cisco IP Phone 7910 Series telephone:

Safety Notices

These are the safety considerations for using the Cisco IP Phone. Read these
notices before installing or using the phone.
This warning symbol means danger. You are in a situation that could cause
Warning
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. To see translations of the warnings that appear in this
publication, refer to the Regulatory Compliance and Safety Information
document that accompanied this device.
78-11443-02
• Safety Notices, page 2-1
• Installing the Phone and Connecting to the Network, page 2-3
C H A P T E R
Getting Started with the Cisco IP Phone 7910 Series
2
2-1