Adjusting The Handset, Speakerphone, And Headset Volume - Cisco 7940 Series User Manual

Chapter 2 How to Use the Handset, Speakerphone, and Headset
Adjusting the Handset, Speakerphone, and Headset
Volume
Step 1
Step 2
Note
78-10182-07
Follow these steps to adjust the volume on the handset, speakerphone, or headset.
Procedure
Press the up or down Volume button when the handset, speakerphone, or headset
is in use.
If you press the Volume button when none of these are in use, you are
Note
adjusting the ringer volume. For details, see the
Volume" section on page
To save this volume setting for future calls, press the Save soft key.
The volume for the handset, speakerphone, and headset will default to the
previously saved volume level with each new phone call. If you adjust the volume
during a call without pressing Save, you are changing the volume level only for
the duration of that particular call; on subsequent calls, the volume level will
revert to the previously saved setting.
You must adjust the volume for the handset, speakerphone, and headset
individually.

Adjusting the Handset, Speakerphone, and Headset Volume

3-12.
Cisco IP Phone 7960 and 7940 Series User Guide
"Adjusting the Ringer
2-5