Digital Control DIGITRAK FALCON F5+ User Manual page 89

DIGITRAK FALCON F5+ USER MANUAL
DCI DigiGuide 11.04.2023
I AM NOT GETTING DATA BACK AT THE DRILL
STEP 1 OF 6
Verify that both units are set to the same telemetry channel.
Under the same locator icon
on the Aurora you'll find a
symbol that looks like a cell
tower which represents four
telemetry channels. These
must be set to the same
channel for the remote and
the locator.
a. To change channels on
your locator, toggle down
into the main menu and
select Settings.
b. Toggle to the telemetry
icon and make sure the
locator icon matches your
remote.
STEP 2 OF 6
Verify that your display on the drill is set to the correct locator.
To change what locator your
remote looks for click the
main menu icon and then
on the locator icon
under Settings.
89
DIGITAL CONTROL, INC