Digital Control DIGITRAK FALCON F5+ User Manual page 31

Use this option if the jobsite has more than one "noisy" spot and you need to
scan and assign the first band, and then move to another spot and assign the
second band.
Use manual selection if you need a lower frequency for drilling
under rebar or if you think another band might work better.
To provide pitch information on your locators, enable full scale
sensitive pitch (FSSP), see the article "Enable Full Scale Pitch
Resolution" in the Advanced Topics Chapter.
STEP 2 OF 7
Ensure all transmitters are powered off or more than 100 ft (30.5 m) away
from the locator.
STEP 3 OF 7
From the Main Menu, select
Transmitter selection.
STEP 4 OF 7
Select Frequency
optimization.
STEP 5 OF 7
Click the blue arrow to start
scan.
DIGITAL CONTROL, INC
DIGITRAK FALCON F5+
DCI DigiGuide
USER MANUAL
11.04.2023
31