Digital Control DIGITRAK FALCON F5+ User Manual page 43

DIGITRAK FALCON F5+ USER MANUAL
DCI DigiGuide 11.04.2023
The locator beeps three
times and displays a check
mark after a successful
calibration.
STEP 5 OF 7
Use the Above Ground Range (AGR) that displays next to check the accuracy
of your calibration. Move the locator to at least two different distances and
verify distance readings match the measurement.
STEP 6 OF 7
Click Cancel to exit to the
Locate Mode screen. Verify
you see clock, pitch, and
signal strength.
STEP 7 OF 7
Fasten the drill head cover properly before drilling.
43
DIGITAL CONTROL, INC