Digital Control DIGITRAK FALCON F5+ User Manual page 69

to one of those locations
and scan again.
STEP 6 OF 10
band with the least noise *
Toggle to the
assign it as the Up band.
Before assigning the down band, pair the Up band to the
transmitter. Otherwise, rescanning will erase the current
frequencies.
STEP 7 OF 10
Select Pair to pair and select
power level. Skip calibration.
STEP 8 OF 10
Move to the other location
with high noise, return to
Frequency Optimization,
and scan again.
DIGITAL CONTROL, INC
, click to select, then click again to
DIGITRAK FALCON F5+
DCI DigiGuide
USER MANUAL
11.04.2023
69