Digital Control DIGITRAK FALCON F5+ User Manual page 56

TRANSMITTER AND BATTERY CARE
STEP 1 OF 6
Remove the transmitter from the drill head.
STEP 2 OF 6
Wipe the transmitter clean so dirt doesn't enter the battery compartment or
accumulate on the battery cap threads.
STEP 3 OF 6
Remove the transmitter batteries to power it off.
The transmitter records run-time for warranty purposes.
STEP 4 OF 6
Inspect the battery compartment, springs, cap, O-ring, battery adapter, and
threads for debris. Clear any debris and replace the battery cap.
Use conductive lubricant on the threads if the battery cap is
difficult to turn.
STEP 5 OF 6
Store batteries so they do not contact metallic objects or terminals of other
batteries.
DIGITAL CONTROL, INC
DIGITRAK FALCON F5+
DCI DigiGuide
USER MANUAL
11.04.2023
56