Quitting Rhythm Sequence Program; Playing Rhythm Sequences - Yamaha Electone EL-900 Owner's Manual

9
148
Audition:
You can play the rhythm sequence at any time during the editing process
by moving the cursor to the point at which you wish to begin playback
and pressing the Rhythm START button.
About Using Registration Memory with the Rhythm Sequence Program:
The rhythms (Rhythm Menu) used to program the sequence can be
changed during editing by selecting different registrations. This allows
you to create a registration that contains the specific rhythms that you
will use in a given sequence, and call up that registration when editing
the sequence.

3) Quitting Rhythm Sequence Program

To quit the Rhythm Sequence Program:
Press the SEQUENCE button in the DISPLAY SELECT section once again.
(The LED of the button will turn off.)

4) Playing Rhythm Sequences

To play any of the rhythm sequences you have created:
1
Press the appropriate Sequence button on the panel.
SEQ. SEQ. MARCH
1 2
USER 1
SEQ. SEQ. TANGO
3 4
USER 5
2
Press the rhythm START button.
INTRO.
ENDING
When one of the four rhythm sequences is playing, each programmed
rhythm that plays is indicated by the lit LED on the Rhythm panel
button.
When a Preset rhythm is playing, the current pattern buttonﾕs LED is
lit.
When a User rhythm is playing, the LEDs of two pattern buttons
(User number and type) are lit.
RHYTHM
WALTZ SWING BOUNCE SLOW
ROCK
USER 2 USER 3 USER 4 A
LATIN 1 LATIN 2 8 BEAT 16 BEAT
USER 6 USER 7 USER 8 C
SYNCHRO START
START
FILL IN
VOLUME
MAX
1
B
2
D
MIN