Setting Up A Docucolor 40 Cp Print Queue For Bindery - Xerox DocuColor 40 User Manual

4
4-12 Setting up Network Servers
T
O ACTIVATE THE BINDERY CONTEXT
1. If you cannot reboot the NetWare server at this point, type the
at the server's colon prompt.
Use the same command as you entered in the
ous procedure).
2. If you can reboot the NetWare server, the
You are ready to set up the DocuColor 40 CP print server and print queue. See the
next section for details.

Setting up a DocuColor 40 CP print queue for bindery

For NetWare 3.x and for 4.x in emulation, the NetWare print server and print queue
for DocuColor 40 CP are created and configured from NetWare Print Console
(PCONSOLE), a NetWare utility that is stored in NetWare's PUBLIC directory.
As with NDS, first you create several NetWare entities on a Novell server, then you
select them in Network Setup on the DocuColor 40 CP Control Panel.
T N W
O SET UP A ET ARE SERVER FOR PRINTING TO THE
1. Log in to the NetWare server as the Supervisor.
2. At the NetWare MS-DOS prompt, type
If you are using NetWare 4.x in bindery mode, Print Console (PCONSOLE) has two
modes. Press the F4 key to switch to Bindery mode.
The Available Options menu is displayed.
3. Choose Change Current File Server and press Enter.
:
AUTOEXEC.NCF
set
command is loaded automatically.
D C
OCU OLOR
pconsole
.
set
command manually
file (in step 6 of the previ-
40 CP: