NEC iPASOLINK EX Advanced Installation Manual page 64

7-2
7.1.2 Start Up Equipment Using USB Memory Device
iPASOLINK EX/A provides a function to start up the equipment using the configuration
information data stored in the USB memory device.
7.1.2.1
Followings should be considered for the data to be used for this function:
 NE Names should be identical. This means that if an NE Name is registered to the
 The Configuration file with no NE Name can be applied for either system with or
 If Configuration data of multiple NEs are stored in the USB memory device, the
 Followings show their file paths when the storage is USB memory device:
File Type
NET/Equipment Configuration
Data
User Configuration Data
GGS-000546-13E
Preparation
equipment, the stored data should have the same NE Name, and also that if the
equipment has no NE Name, then the stored data should not have the NE Name
either.
without an NE Name.
data with the identical NE Name (including no name) to that of the connected
equipment will be uploaded.
Table 7-1 Designated File Path
NE Name
Registered
No Name
Registered
No Name
File Path File Name
<NE Name>
/config/
/config/ ex10-netequip.cfg
<NE Name>
/config/
ex10-user.cfg
/config/ ex10-user.cfg
iPASOLINK EX Advanced: I
START UP AND SHUT DOWN
-ex10-netequip.cfg
-ex10-user.cfg
NSTALLATION