NEC iPASOLINK EX Advanced Installation Manual page 58

5-26
5.8.2.2
If the connector of the other end (at the power unit side) is larger than 14.5 mm in
diameter, and is already assembled, put the cable through the Waterproofing Plug
Cover and Watertight Hose through prior to starting the procedure below . See
5.4 Power Cable
 Plug Cover Mechanism:
1. Disassemble the Waterproofing Plug Cover.
2. Put the cable into and through the parts.
GGS-000546-13E
Considering to Wear Waterproofing Plug Cover
also.
Figure 5-34 Set Waterproofing Cover Parts
Figure 5-33 Plug Cover
iPASOLINK EX Advanced: I
CONNECT CABLES
NSTALLATION