NEC iPASOLINK EX Advanced Installation Manual page 63

START UP AND SHUT DOWN
7.1 Start Up iPASOLINK EX/A
7.1.1 Basic Operation
CAUTIONS:
Equipment surface may be hot after starting up. Ensure not to
touch the equipment.
1. Confirm that the power cable is properly connected:
2. SYSTEM LED (Green) starts blinking by turning on the equipment.
3. When the starting-up process is completed, the SYSTEM LED stays on.
4. The only first start up of the equipment disable the radio output, It will be
WARNING:
Do not turn off the power until the start-up process is complete.
Repeated turning the power on and off within a short interval may
cause the equipment failure.
iPASOLINK EX Advanced: I
7. START UP AND SHUT DOWN
 In case of Power Port: the power cable (SELV) should be connected at
DC –48V Port.
 In case of PoE: the LAN cable should be connected at DCN (PoE) Port.
able to output radio power from the second time start up.
NSTALLATION
7-1
GGS-000546-13E