Wren Kitchens INFINITY PLUS Base Unit Fittings Manual page 12

Fixing the corner post to the unit
Move the adjacent base unit away from the
corner unit.
Clamp Panel Z to Packer Z1 on the corner
unit 18mm from the centre post edge.
Use 4x30mm screws to attach them
together, ensuring the screws are equally
spaced.
Measuring the blanking panel size
To determine the correct dimensions for the
blanking panel, measure from the outside
edge of the unit's side panel to the start of
the corner post (Panel Z).
Cut the blanking panel to the required width.
Position the blanking panel with its white side facing the unit
Fixing the blanking panel
Position 7x15mm screws 9mm from the
edges of the blanking panel to secure it into
the unit end panel, top rail, and bottom fixed
shelf, ensuring the screws are evenly spaced.
View from
above the
corner
post.
Centre
Post
Page 12