Using Quick Dials - Ricoh FAX4430NF Operating Instructions & Basic Features

Preparation
To use the User Function key with
the Tone function programmed in,
you need to assign this function to
a User Function key beforehand.
See p.101 "User Function Keys",
Advanced Features .
Limitation
❒ You cannot place a tone before the
first digit of a fax number.
❒ Some services may not be available
when using the Tone feature.
Note
❒ A tone is shown as a " • " on the
display.
❒ You can choose whether to use the
{p} key as a Tone key with the
User Parameters. See p.139 "User
Parameters", Advanced Features .
When using Tone with On Hook Dial
A
Press the {On Hook Dial} key.
B
Enter the fax number with the
number keys.
C
Press the User Function key ( {F1}
to {F10} ) in which"Tone"is pro-
grammed.
D
Enter a code number for receiving
a special service with the number
keys.
Note
❒ The entered number will be sent
by tonal signals.

Using Quick Dials

You can specify a destination simply
by pressing a Quick Dial.
Preparation
You must program the destina-
tion's fax number in a Quick Dial
beforehand. Additionally, you can
program a name for the destina-
tion in the Quick Dial. To program,
edit, or delete a Quick Dial, see
p.65 "Quick Dial".
ZHMS240E
Note
❒ To check the contents of all Quick
dials, print the Quick Dial list. See
p.105 "Reports/Lists", Advanced
Features .
❒ Switch between Quick Dials {01}
to {30}, {31} to {60}, and {61} to
{90} with the Quick Dial Key Flip
Plates.
Reference
p.47 "Dialing"
Dialing
2
ZHMS170E
49