Ricoh FAX4430NF Operating Instructions & Basic Features page 90

Programming
K
Specify the destination using one
of the following three methods:
Enter the fax number with the
number keys.
Press a Quick Dial key.
3
Press the {Speed Dial} key and en-
ter a Speed Dial number.
Note
❒ You can use "Redial" when spec-
ifying the destination. See p.44
"Redial", Advanced Features .
L
Press the {OK} key.
Confirm that "Add" is selected.
M
To add another destination, re-
peat steps
N
If you finished adding a destina-
tion, press the 0 or 1 to select "
Exit ".
84
J L
to .
O
Press the {OK} key.
Programmed Group name is dis-
played.
If you do not edit the Group name,
Q
proceed to step
P
Press the {Clear/Stop} key, and
then enter another name.
Q
Press the {OK} key.
R
Press 0 or 1 to select whether to
assign the Group to a Quick Dial
key.
If you want to assign the Group to
a Quick Dial key, select "Yes".
If you do not, select "No", and then
U
proceed to step
S
Perform one of the following pro-
cedures:
When the group was assigned to
a Quick Dial key
A Press 0 or 1 to select whether
to change the assigned Quick
Dial key.
If you want to assign the Group
to another Quick Dial key, select
"Yes".
If you do not, select "No", and
then proceed to step U.
.
.