Surround Panning - Yamaha 01V96i Reference Manual

3.
Select one of seven trajectory patterns by
turning on the corresponding trajectory pat-
tern button.
The following patterns are available:
• ......The sound image moves between left and right.
36 40
• ......The sound image moves between front and rear.
36 40
• ......The sound image moves from front left to rear
right. With this pattern, you can also fine-tune
the trajectory by using the WIDTH, DEPTH,
OFFSET ( ), and OFFSET (
36 36 36 12 8
• ......The sound image moves from front right to rear
left. With this pattern, you can also fine-tune the
trajectory using the WIDTH, DEPTH, OFFSET
( ), and OFFSET (
36 36 36 12 8
• ......The sound image moves between left and right
while tracing an arc. With this pattern, you can
also fine-tune the radius and shape of the arc
using the WIDTH, DEPTH, OFFSET (
OFFSET ( ) parameters.
40 48 44 44 20
• ......The sound image moves between front and rear
while tracing an arc. With this pattern, you can
also fine-tune the radius and shape of the arc
using the WIDTH, DEPTH, OFFSET (
OFFSET ( ) parameters.
40 48 44 44 20
40 56
40 56
) parameters.
8 44 16 20 16
) parameters.
8 44 16 20 16
), and
32 28 56 32 24
), and
32 28 56 32 24

Surround Panning

• ......The sound image moves while tracing a circle or
oval. With this pattern, you can also fine-tune the
radius and shape of the circle or oval using the
WIDTH, DEPTH, OFFSET (
( ) parameters.
44 48 32 24 24
4.
If necessary, fine-tune the trajectory by edit-
ing the WIDTH, DEPTH, OFFSET (
OFFSET ( ) parameter values.
5.
To move the sound image, move the cursor to
anywhere outside the parameter boxes, then
rotate the Parameter wheel.
The sound image of the selected channel moves along the
selected trajectory pattern.
Tip: You can also adjust the front and rear or left and right
movement, the trajectory pattern and other parameters from
an external MIDI device by assigning the surround param-
eters to MIDI Control Changes (see page 104).
6.
To link the surround pan settings of two chan-
nels displayed on the page, turn on the ST
LINK button.
Use the PATTERN parameter box below the ST LINK
button to specify how you want the linked surround pan
to move.
The following table shows how the sound images on two
linked channels move when different trajectory patterns
and stereo link patterns are combined. A solid line indi-
cates the movement of the selected channel, and a dot-
ted line indicates the movement of the linked partner.
Trajectory
Patterns
57
), and OFFSET
24 60 40 52 40
), and
01V96i—Reference Manual